Utjecaj kvalitete praška i naknadnog naštrcavanja na otpornost prevlake na abrazijsko trošenje

Translated title of the contribution: Influence of powder quality and additional flame spraying on abrasive wear resistance of coating

Sara Havrlišan, Katica Šimunović, Tomislav Šarić, Goran Šimunović, Ilija Svalina, Roberto Lujić, Štefanija Klarić

Research output: Chapter in Book/Report/Conference proceedingConference Paper published in Proceedingspeer-review

Abstract

The aim of this paper is to investigate the influence of powder quality (Eutalloy 10009 and Eutalloy 10185) and additional flame spraying with simultaneous fusing on abrasive wear resistance of coating. The results of abrasive wear resistance of coatings sprayed with powder stored for a longer period of time (required thickness was achieved by additional spraying) and results of flame spraying with a new powder (required thickness was achieved in one step) are compared and analysed. The “dry sand/rubber wheel” test was used according to ASTM G65-94 norm.
Translated title of the contributionInfluence of powder quality and additional flame spraying on abrasive wear resistance of coating
Original languageUndefined
Title of host publication10. MEDUNARODNO ZNANSTVENO-STRUČNO SAVJETO1VANJE SBZ 2019
EditorsIvan Samardžić, Božo Despotović
Place of PublicationSlavonski Brod
PublisherMechanical Engineering Faculty in Slavonski Brod
Chapter37
Pages413-422
Number of pages10
Publication statusPublished - Oct 2019
Event10. International Scientific-Professional Conference: Engineering Technologies in Manufacturing of Welded Constructions and Products - Slavonski Brod, Croatia
Duration: 16 Oct 201918 Oct 2019
Conference number: 10

Conference

Conference10. International Scientific-Professional Conference
Abbreviated titleSBW 2019
Country/TerritoryCroatia
CitySlavonski Brod
Period16/10/1918/10/19

Fingerprint

Dive into the research topics of 'Influence of powder quality and additional flame spraying on abrasive wear resistance of coating'. Together they form a unique fingerprint.

Cite this