Istraživanje Utjecaja Parametara 3D Printanja Na Vlačnu Čvrstoću

Translated title of the contribution: Research on the Impact of 3D Printing Parameters on Tensile Strength

S. Havrlišan, H. Wang, Š. Klarić

Research output: Chapter in Book/Report/Conference proceedingConference Paper published in Proceedingspeer-review

3 Downloads (Pure)


[translation] The aim of the study is to investigate the influence of 3D printing parameters (layer thickness and infill density) on tensile strength and to obtain a regression model for predicting tensile strength through planned experiments. A factorial experimental design with two levels and three replications was applied. The input parameters varied at two levels: layer thickness (0.1 and 0.3 mm) and infill density (20 and 50%), while the output parameter was tensile strength. Statistical analysis of experimental data concluded that both parameters (layer thickness and infill density) have an impact on tensile strength, while the interaction between these two parameters does not have an effect. A regression model with a high coefficient of determination (R2) was obtained for predicting tensile strength.
Translated title of the contributionResearch on the Impact of 3D Printing Parameters on Tensile Strength
Original languageCroatian
Title of host publicationZbornik Radova
PublisherUniversity of Novi Sad, Faculty of Technology
Number of pages4
ISBN (Print)978-86-6022-617-6
Publication statusPublished - Dec 2023
EventInternational Scientific Conference Novi Sad - Novi Sad, Serbia
Duration: 7 Dec 20239 Dec 2023


ConferenceInternational Scientific Conference Novi Sad
CityNovi Sad

Cite this