Utjecaj kvalitete praška i naknadnog naštrcavanja na otpornost prevlake na abrazijsko trošenje

Sara  Havrlišan; Katica Šimunović; Tomislav Šarić; Goran Šimunović; Ilija Svalina; Roberto Lujić; Štefanija Klarić

Utjecaj kvalitete praška i naknadnog naštrcavanja na otpornost prevlake na abrazijsko trošenje

Translated title of the contribution: Influence of powder quality and additional flame spraying on abrasive wear resistance of coating

Sara Havrlišan, Katica Šimunović, Tomislav Šarić, Goran Šimunović, Ilija Svalina, Roberto Lujić, Štefanija Klarić

Research output: Chapter in Book/Report/Conference proceeding › Conference Paper published in Proceedings › peer-review

Abstract

The aim of this paper is to investigate the influence of powder quality (Eutalloy 10009 and Eutalloy 10185) and additional flame spraying with simultaneous fusing on abrasive wear resistance of coating. The results of abrasive wear resistance of coatings sprayed with powder stored for a longer period of time (required thickness was achieved by additional spraying) and results of flame spraying with a new powder (required thickness was achieved in one step) are compared and analysed. The “dry sand/rubber wheel” test was used according to ASTM G65-94 norm.

Translated title of the contribution	Influence of powder quality and additional flame spraying on abrasive wear resistance of coating
Original language	Undefined
Title of host publication	10. MEDUNARODNO ZNANSTVENO-STRUČNO SAVJETO1VANJE SBZ 2019
Editors	Ivan Samardžić, Božo Despotović
Place of Publication	Slavonski Brod
Publisher	Mechanical Engineering Faculty in Slavonski Brod
Chapter	37
Pages	413-422
Number of pages	10
Publication status	Published - Oct 2019
Event	10. International Scientific-Professional Conference: Engineering Technologies in Manufacturing of Welded Constructions and Products - Slavonski Brod, Croatia Duration: 16 Oct 2019 → 18 Oct 2019 Conference number: 10

Conference

Conference	10. International Scientific-Professional Conference
Abbreviated title	SBW 2019
Country/Territory	Croatia
City	Slavonski Brod
Period	16/10/19 → 18/10/19

Access to Document

https://dtzsb.unisb.hr/?page_id=61

Cite this

Havrlišan, S., Šimunović, K., Šarić, T., Šimunović, G., Svalina, I., Lujić, R., & Klarić, Š. (2019). Utjecaj kvalitete praška i naknadnog naštrcavanja na otpornost prevlake na abrazijsko trošenje. In I. Samardžić, & B. Despotović (Eds.), 10. MEDUNARODNO ZNANSTVENO-STRUČNO SAVJETO1VANJE SBZ 2019: Engineering Technologies In Manufacturing Of Welded Constructions And Products, SBW 2019 (pp. 413-422). Mechanical Engineering Faculty in Slavonski Brod. https://dtzsb.unisb.hr/?page_id=61

Havrlišan, Sara ; Šimunović, Katica ; Šarić, Tomislav et al. / Utjecaj kvalitete praška i naknadnog naštrcavanja na otpornost prevlake na abrazijsko trošenje. 10. MEDUNARODNO ZNANSTVENO-STRUČNO SAVJETO1VANJE SBZ 2019: Engineering Technologies In Manufacturing Of Welded Constructions And Products, SBW 2019. editor / Ivan Samardžić ; Božo Despotović. Slavonski Brod : Mechanical Engineering Faculty in Slavonski Brod, 2019. pp. 413-422

@inproceedings{8c26289501a9438aa1b694574e6258a4,

title = "Utjecaj kvalitete pra{\v s}ka i naknadnog na{\v s}trcavanja na otpornost prevlake na abrazijsko tro{\v s}enje",

abstract = "The aim of this paper is to investigate the influence of powder quality (Eutalloy 10009 and Eutalloy 10185) and additional flame spraying with simultaneous fusing on abrasive wear resistance of coating. The results of abrasive wear resistance of coatings sprayed with powder stored for a longer period of time (required thickness was achieved by additional spraying) and results of flame spraying with a new powder (required thickness was achieved in one step) are compared and analysed. The “dry sand/rubber wheel” test was used according to ASTM G65-94 norm.",

keywords = "Flame spraying with simultaneous fusing, abrasion resistance, Eutalloy 10009, Eutalloy 10185",

author = "Sara Havrli{\v s}an and Katica {\v S}imunovi{\'c} and Tomislav {\v S}ari{\'c} and Goran {\v S}imunovi{\'c} and Ilija Svalina and Roberto Luji{\'c} and {\v S}tefanija Klari{\'c}",

year = "2019",

month = oct,

language = "Undefined",

pages = "413--422",

editor = "Ivan Samard{\v z}i{\'c} and Bo{\v z}o Despotovi{\'c}",

booktitle = "10. MEDUNARODNO ZNANSTVENO-STRU{\v C}NO SAVJETO1VANJE SBZ 2019",

publisher = "Mechanical Engineering Faculty in Slavonski Brod",

note = "10. International Scientific-Professional Conference ; Conference date: 16-10-2019 Through 18-10-2019",

}

Havrlišan, S, Šimunović, K, Šarić, T, Šimunović, G, Svalina, I, Lujić, R & Klarić, Š 2019, Utjecaj kvalitete praška i naknadnog naštrcavanja na otpornost prevlake na abrazijsko trošenje. in I Samardžić & B Despotović (eds), 10. MEDUNARODNO ZNANSTVENO-STRUČNO SAVJETO1VANJE SBZ 2019: Engineering Technologies In Manufacturing Of Welded Constructions And Products, SBW 2019. Mechanical Engineering Faculty in Slavonski Brod, Slavonski Brod, pp. 413-422, 10. International Scientific-Professional Conference, Slavonski Brod, Croatia, 16/10/19. <https://dtzsb.unisb.hr/?page_id=61>

Utjecaj kvalitete praška i naknadnog naštrcavanja na otpornost prevlake na abrazijsko trošenje. / Havrlišan, Sara ; Šimunović, Katica; Šarić, Tomislav et al.
10. MEDUNARODNO ZNANSTVENO-STRUČNO SAVJETO1VANJE SBZ 2019: Engineering Technologies In Manufacturing Of Welded Constructions And Products, SBW 2019. ed. / Ivan Samardžić; Božo Despotović. Slavonski Brod: Mechanical Engineering Faculty in Slavonski Brod, 2019. p. 413-422.

Research output: Chapter in Book/Report/Conference proceeding › Conference Paper published in Proceedings › peer-review

TY - GEN

T1 - Utjecaj kvalitete praška i naknadnog naštrcavanja na otpornost prevlake na abrazijsko trošenje

AU - Havrlišan, Sara

AU - Šimunović, Katica

AU - Šarić, Tomislav

AU - Šimunović, Goran

AU - Svalina, Ilija

AU - Lujić, Roberto

AU - Klarić, Štefanija

N1 - Conference code: 10

PY - 2019/10

Y1 - 2019/10

N2 - The aim of this paper is to investigate the influence of powder quality (Eutalloy 10009 and Eutalloy 10185) and additional flame spraying with simultaneous fusing on abrasive wear resistance of coating. The results of abrasive wear resistance of coatings sprayed with powder stored for a longer period of time (required thickness was achieved by additional spraying) and results of flame spraying with a new powder (required thickness was achieved in one step) are compared and analysed. The “dry sand/rubber wheel” test was used according to ASTM G65-94 norm.

AB - The aim of this paper is to investigate the influence of powder quality (Eutalloy 10009 and Eutalloy 10185) and additional flame spraying with simultaneous fusing on abrasive wear resistance of coating. The results of abrasive wear resistance of coatings sprayed with powder stored for a longer period of time (required thickness was achieved by additional spraying) and results of flame spraying with a new powder (required thickness was achieved in one step) are compared and analysed. The “dry sand/rubber wheel” test was used according to ASTM G65-94 norm.

KW - Flame spraying with simultaneous fusing

KW - abrasion resistance

KW - Eutalloy 10009

KW - Eutalloy 10185

M3 - Conference Paper published in Proceedings

SP - 413

EP - 422

BT - 10. MEDUNARODNO ZNANSTVENO-STRUČNO SAVJETO1VANJE SBZ 2019

A2 - Samardžić, Ivan

A2 - Despotović, Božo

PB - Mechanical Engineering Faculty in Slavonski Brod

CY - Slavonski Brod

T2 - 10. International Scientific-Professional Conference

Y2 - 16 October 2019 through 18 October 2019

ER -

Havrlišan S, Šimunović K, Šarić T, Šimunović G, Svalina I, Lujić R et al. Utjecaj kvalitete praška i naknadnog naštrcavanja na otpornost prevlake na abrazijsko trošenje. In Samardžić I, Despotović B, editors, 10. MEDUNARODNO ZNANSTVENO-STRUČNO SAVJETO1VANJE SBZ 2019: Engineering Technologies In Manufacturing Of Welded Constructions And Products, SBW 2019. Slavonski Brod: Mechanical Engineering Faculty in Slavonski Brod. 2019. p. 413-422

Utjecaj kvalitete praška i naknadnog naštrcavanja na otpornost prevlake na abrazijsko trošenje

Abstract

Conference

Access to Document

Fingerprint

Cite this